Click for RPI Home Page Click for RPI Home Page
Display Shopping Cart Click for Quick Search
Place an Order Log in
OverviewSavings CalculatorConvince MeParts for Water-MizerWater-Mizer ManualWater-Mizer BrochureCommentsPress ReleaseRequest More InformationInfant Incubators and WarmersGeneral Shop Aids

WATER-MIZER Water Saving and Tempering Device for Sterilization

Water Saving and Tempering Device for Sterilization

Retrofit your existing bulk sterilizers with the Water-Mizer kit
to realize tremendous water and cost savings

What is the Water-Mizer

The average sterilizer uses between 1 to 5 gallons of water per minute continuously. The water is used to reduce the temperature of hot condensate created in the sterilizing process prior to sending it down the drain. The Water-Mizer, a water-saving device, eliminates the "tempering" water consumption during the non-sterilizing portion of the sterilizer’s cycle thereby substantially reducing overall water consumption.

Why Use the Water-Mizer

There are two reasons to use a water tempering device. First, most municipalities prohibit draining water hotter than 140° F (60° C) into their sewer systems. And second, PVC drain pipes are susceptible to damage from water that is too hot. When faced with either of these situations, the WATER-MIZER is the solution!

WATER-MIZER®
RPI Part #RPA466

What the Water-Mizer Can Do For Your Facility

Most steam sterilizers waste gallons of water by using continuous cold water to temper the steam condensate. The WATER-MIZER monitors the drain temperature and applies cold water only when needed – resulting in tremendous water savings. In fact, the average savings* with a WATER-MIZER installed is approximately 45-50 gallons per hour per sterilizer with a cost savings of $2,500 per sterilizer per year. To see how much your facility can save with the WATER-MIZER, click here to use the Water Savings Calculator to help calculate both water and cost savings.

The WATER-MIZER is non-electric so no wiring is required. It operates independently from OEM controls and can be used with the majority of bulk steam sterilizers including: AMSCO 2000 & 3000 Series, Pre-1995 Getinge/Castle, and Other Older Model Bulk Sterilizers. In addition, its space-efficient design allows it to be mounted two different ways – by attaching it directly to the frame of sterilizer equipment or by attaching it to an adjustable floor stand.

Want to Know More About the Water-Mizer?

Click here for detailed information about the Water-Mizer including a presentation to assist you in your hospital's decision making-process; comments from other hospitals and organizations about the benefits of the Water-Mizer; and the Water-Mizer installation, operation and maintenance manual.

 

QUICK SEARCH | NEW PARTS INDEX | OEM PARTS LISTING | RPI TECH HELP | PLACE AN ORDER | PAY AN INVOICE
PRODUCT CATALOG | ABOUT RPI | RPI NEWS | RPI LINKS | USING THIS SITE | SUGGESTION FORM | CONTACT US | HOME

Since 1972 the leader in quality replacement parts for hospital, medical, dental, and laboratory equipment.
Replacement Parts Industries, Inc. • 625 Cochran Street • Simi Valley, California 93065 • (800) 221-9723
Copyright © 1996-2024 Replacement Parts Industries, Inc. All Rights Reserved.